Cloud-electronics RH-8c Uživatelský manuál stáhnout pdf (Strana 14)

RH-8 Installation Guide

Mounting the RH-8 on a at surface

Use the two holes

to x the RH-8 to a at surface, using wood screws or

other xings as appropriate to the surface material. Remove the top cover of

the RH-8 by undoing the two screws

to access the xing holes.

If connection is to be made via the RJ45 socket in the base, it will be necessary

to cut a suitable hole (ideally rectangular) in the surface, aligned with the

socket. The RJ45 plug can then be inserted through the surface to mate with

the socket.

Secure the top cover with the original screws after mounting the unit.

1 2 ... 9 10 11 12 13 14 15 16

Žádné komentáře

Cloud-electronics RH-8c Uživatelský manuál Strana 14