Cloud-electronics RH-8c Uživatelský manuál stáhnout pdf (Strana 9)

RH-8 Installation Guide

RJ45 connection

If the RH-8 is to be installed on an exercise

machine or similar, we recommend that

a standard data connection point (RJ45

socket) is installed adjacent to the RH-8

location, and that this is wired back to the

CAM-16/CAS-16 using CAT-5 installation

cable. The 3 m cable supplied with the RH-8

can then be used to patch between this

socket and the RH-8.

Ensure that the data point is installed in a

safe location. A ush-mounting oor socket

with a hinged lid or a recessed oorbox

is the ideal solution, as this minimises

the likelihood of damage to the cable or

connector.

If the RH-8 is to be mounted on a at

surface, there will probably be no necessity

for the intermediate data point, and the installed CAT-5 cable can be run

directly to the RH-8’s location.

See “Mounting the RH-8 on a at surface” on page 14.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Cloud-electronics RH-8c Uživatelský manuál Strana 9