Cloud-electronics CXL-100T Uživatelský manuál stáhnout pdf (Strana 8)

CXL Manual v1.08

Wiring the rackmount

housings

Inputs:

The transformer inputs should be connected to the low-

impedance output of the relevant amplier channel. Use

the mating 2-pin 5 mm-pitch screw-terminal connectors

supplied with the transformers, and wire with two-core

stranded cable of at least 1.5 mm

gauge. (In the case of the

model CXL-400T, 2.5 mm

cable is recommended if the

transformers are not adjacent to the amplier.)

Outputs:

The transformer outputs may be connected to the

loudspeaker system. Use the mating 3-pin 5 mm-pitch

screw-terminal connectors supplied with the transformers,

and two-core stranded cable of at least 0.75 mm

gauge

(CXL-40T, CXL-100T & CXL-200T) or 1 mm

gauge

(CXL-400T). Note that pins 1 and 3 should be wired for a

100 V-line system, and pins 1 and 2 for a 70 V-line system.





































When all the connections have been made, t the PVC

external safety cover over the rear panel connectors. The six

xing holes in the cover should align with the six hex pillars.

Secure it in place with six of the supplied M3 x 6 mm Pozi

screws.

1 2 3 4 5 6 7 8 9 10 11 12

Komentáře k této Příručce

Žádné komentáře

Cloud-electronics CXL-100T Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Hardware Cloud-electronics CXL-100T